When your furnace stops working in the middle of a Mississippi winter, the first question on your mind is usually: how much is this going to cost me?
The answer depends on what’s broken, the age of your system, and who you call to fix it. At Coleman’s A/C Heating & Appliance Repair, we believe in straight answers — no surprises, no runaround. So here’s a real breakdown of what furnace repair costs in 2026, with pricing ranges specific to the Central Mississippi market.
Average Furnace Repair Costs in 2026
Most homeowners in the Jackson, MS area pay between $150 and $1,500 for furnace repairs, with the national average sitting around $300–$500 for a typical service call. Here’s a general breakdown by repair complexity:
| Repair Type | Typical Cost Range |
|---|---|
| Minor repairs (sensor cleaning, filter, ignitor) | $75 – $350 |
| Moderate repairs (blower motor, capacitor, flame sensor) | $350 – $900 |
| Major repairs (heat exchanger, control board, compressor) | $900 – $2,500+ |
| Emergency/after-hours service call fee | $75 – $150 additional |
Coleman’s tip: If a repair quote is approaching $1,500 or more — especially on a system that’s 15+ years old — it’s often smarter to put that money toward a replacement. We’ll always give you an honest comparison before you decide.
Common Furnace Repairs and What They Cost
Ignitor Replacement — $150 to $300
The ignitor is one of the most common furnace failures, especially in gas furnaces. It’s what sparks your heating cycle. Signs of a bad ignitor include a furnace that clicks but won’t fire, or one that shuts off shortly after starting. Parts are usually affordable; labor brings the total to around $150–$300.
Flame Sensor Cleaning or Replacement — $75 to $200
A dirty or failed flame sensor causes the furnace to shut itself off as a safety measure. This is one of the cheaper fixes — often just a cleaning — and a good technician can handle it in under an hour.
Thermostat Repair or Replacement — $150 to $500
If your furnace isn’t responding to your thermostat, the problem might not be the furnace at all. Thermostat replacement ranges from $150 for a basic unit to $500 or more for a programmable smart thermostat with installation.
Blower Motor Repair or Replacement — $400 to $900
The blower motor pushes heated air through your ducts. When it fails, you might feel warmth near the unit but nothing coming from your vents. This is a mid-range repair — motors can be expensive depending on the brand and whether the part needs to be ordered.
Capacitor Replacement — $150 to $350
The capacitor gives the blower motor the power boost it needs to start. It’s a relatively quick fix but shouldn’t be delayed — a bad capacitor makes your motor work harder and can cause it to burn out.
Control Board Replacement — $500 to $1,500
The control board is your furnace’s brain. When it fails, the system may behave erratically — cycling on and off, not responding to settings, or not starting at all. This is one of the pricier repairs, and on older systems it may not be worth it.
Heat Exchanger Repair or Replacement — $1,000 to $2,500+
This is the big one. A cracked heat exchanger is a serious safety issue — it can allow carbon monoxide to enter your home’s air supply. If your technician identifies a cracked heat exchanger, this repair is expensive enough that replacement is often the better long-term choice.
What Affects Furnace Repair Costs in Mississippi?
Repair costs aren’t one-size-fits-all. A few factors will push your quote higher or lower:
Age of the system. Older furnaces — particularly those over 15 years old — often need parts that are harder to source. That drives up both cost and repair time.
Type of furnace. Gas furnaces are the most common heating system in the Jackson metro area. Electric furnaces tend to have lower repair costs but higher operating costs. Older oil and propane systems can be expensive to service due to parts availability.
Brand and model. Common brands like Carrier, Trane, Goodman, and Payne are easier and faster to source parts for. Less common brands can mean delays and premium pricing.
Time of service. Emergency calls — nights, weekends, holidays — typically carry an additional service fee of $75–$150 on top of the repair cost.
Maintenance history. A furnace that’s been serviced regularly will almost always cost less to repair than one that’s been ignored for years. Dirty systems have to work harder, and that wears out components faster.
Furnace Repair vs. Replacement: How to Decide
A helpful rule of thumb is the 5,000 rule: multiply the age of your furnace by the estimated repair cost. If the result exceeds $5,000, a replacement is usually the better investment. Energy Star recommends replacing heating equipment that’s more than 15 years old with a high-efficiency model to save on energy costs long-term.
For example: a 12-year-old furnace facing a $500 repair → 12 × $500 = $6,000. That number suggests replacement may make more financial sense.
At Coleman’s, we’ll never push you toward a new system if a repair makes sense. But we’ll also never let you sink money into a system that’s likely to keep failing. We give you the full picture and let you decide.
How to Save on Furnace Repair Costs
Schedule annual maintenance. An annual tune-up catches small problems before they become expensive ones. Our ComfortCare Maintenance Plan gives you year-round coverage for both your HVAC system and appliances, with priority scheduling and exclusive member discounts.
Change your filter regularly. A clogged filter is one of the top causes of furnace failure. Replace it every 1–3 months depending on your household — more often if you have pets or allergies.
Don’t ignore warning signs. Strange noises, uneven heating, a furnace that cycles on and off frequently, or a spike in your energy bill are all signs something is off. Catching it early almost always costs less than waiting until the system quits entirely.
Ask about financing. Coleman’s offers flexible financing options so you’re never forced into a rushed decision because of cost. Whether it’s a repair or a replacement, we can help make it work for your budget.
Signs You Need Furnace Repair Now
Call us if you’re experiencing any of the following:
- Your furnace turns on but doesn’t produce heat
- You hear banging, rattling, squealing, or clicking sounds
- The furnace cycles on and off repeatedly (short cycling)
- Some rooms in your home are much colder than others
- Your energy bill has spiked with no clear reason
- You smell burning or notice unusual odors from your vents
- Your carbon monoxide detector is going off
If your carbon monoxide detector activates, leave the home immediately and call 911 before calling for HVAC service. Learn more about carbon monoxide safety from the CDC.
Why Jackson, MS Homeowners Choose Coleman’s
At Coleman’s A/C Heating & Appliance Repair, we’re not a franchise or a call center — we’re a locally owned family business serving Crystal Springs, Jackson, Brandon, Pearl, Clinton, Florence, Richland, and surrounding communities throughout Hinds, Madison, Rankin, and Copiah Counties.
Here’s what sets us apart:
- Licensed, experienced technicians who show up on time
- Upfront, transparent pricing — you know the cost before we start
- Same-day and emergency service available when you need it most
- Financing available with $0 down options
- ComfortCare Maintenance Plans to keep your system running year-round
We service all major furnace brands including Carrier, Trane, Goodman, Payne, Rheem, and more.
Frequently Asked Questions About Furnace Repair
How much does a furnace repair service call cost in Jackson, MS? Most HVAC companies charge a diagnostic or service call fee of $75–$150, which is often applied toward the repair cost if you proceed with the service. At Coleman’s, we believe in transparent pricing — you’ll know what you’re paying before any work begins.
How long does furnace repair take? Most standard repairs can be completed in 1–3 hours during the same visit. Repairs requiring special-order parts may take longer. We’ll give you a realistic timeframe upfront.
Is it worth repairing an old furnace? It depends on the age, the repair cost, and the condition of the rest of the system. A general rule: if the repair costs more than half the price of a new unit, or if the system is over 15 years old, replacement is often the smarter investment. We’ll help you run the numbers.
Do you offer emergency furnace repair in Jackson, MS? Yes. Coleman’s offers emergency HVAC service for situations where you can’t wait until morning. Call us at 601-398-2368.
What brands do you service? We service all major brands including Carrier, Trane, Goodman, Payne, Rheem, Daikin, and more.
Can regular maintenance prevent expensive furnace repairs? Absolutely. Most major furnace failures are preceded by smaller warning signs that regular maintenance catches early. Our ComfortCare Plan is designed specifically to help homeowners avoid costly emergency repairs.
Schedule Your Furnace Repair in Jackson, MS Today
Don’t wait until a minor problem becomes a major one. If your furnace is acting up, call Coleman’s A/C Heating & Appliance Repair at 601-398-2368 or book online to schedule your service.
We serve Jackson, Crystal Springs, Brandon, Pearl, Clinton, Florence, Richland, and all of Central Mississippi.
